The words “coating” and “paint” are sometimes used interchangeably but technically speaking they are not the same. Epoxy Floor Paint has lower solids and less Epoxy resin than Epoxy Floor Coating.while DFT of Epoxy Floor Coating is more than 2 mils. Dry Film Thickness (DFT) of Epoxy Floor Paint is less than 2 mils.Epoxy Floor Paint “ dries” while Epoxy Floor Coating “ cures”.When it comes to Epoxy Paint vs Epoxy Coating, the differences are: Many paints & coatings manufacturers and garage floor contractors have, knowingly or unknowingly, led to this confusion in the minds of homeowners. Unfortunately not right, but your confusion is totally understandable. Bottom line Epoxy Paint vs Epoxy CoatingĮpoxy Paint vs Epoxy Coating? Are they not the same? Both are epoxies and coating is just another word for paint.Choose Watco Epoxicote High Build for such areas. Unsuitable for outside application, (it will fade), instead use Watco Fastcoat.Īvoid using in confined spaces with little or no ventilation since it won’t dry. May cause rusting if applied to bare metal. Now it is mixed you have up to 2 hours to apply it before it become unusable.Īvoid applying in cold (below 15☌) conditions, instead see Watco Cold Set Coating.ĭo not apply direct to dense, non-porous surfaces such as power floated concrete. This should first be coated with Watco Powerfloat Primer. A brush can be used to cut in around edges. Mix thoroughly then tip the contents into a paint tray and apply using a medium pile roller. Just use half the tin of aggregate if you are using the 2.5L size. Then empty the contents into a mixing pail (a plastic bucket is ideal) and add the contents of the resin tin. If using the 5L anti slip version follow the above instructions, but empty the tin of aggregate into the larger, curing agent tin and mix this thoroughly. A paint mixer in an electric drill is ideal. Mix the two components thoroughly using a wide bladed tool such as a piece of batten. Stir the contents of the resin and curing agent tins and then empty the content of the resin into the curing agent tin. ApplicationĬheck the air temperature is around 15☌ and the floor temperature at least 10☌.
Holes in excess of 5mm deep can be filled with Watco Basics Floor Repair Mortar, or providing the floor is level, Watco Pourable Repair Mortar.įor repairs which need to be ‘feather edged’ to nothing, or for repairs to damaged joint edges, please refer to Watco Concrex epoxy resin repair mortar. This should also be used if repairing broken kerb edges or step nosings. This paint is water-based, so it doesn’t matter if the floor remains slightly damp after cleaning. New concrete should be at least 2 months old.
#Epoxy paint 2 part free#
Make sure the surface is clean and dust free before continuing. Remove any flaking or poorly bonded paint using a floor scraper for smaller areas or hire a grinder for larger areas. Smooth, glossy paint should be lightly abraded to provide a key. If over coating existing paint, please ensure it is well bonded. This will remove grease and oil deposits from existing paint. Clean and prepare bare concrete using Watco Bio-D.
0 kommentar(er)
